1. Promat Australia
  2. Products
  3. PROMASEAL®-A Acrylic Sealant

PROMASEAL®-A Acrylic Sealant

  • PROMASEAL®-A Acrylic Sealant

ADVANTAGES

  • Low VOC
  • Water Based for easy clean up
  • Require for use with most other Promat systems
  • Up to FRL -/180/180 for penetration seals
  • Up to FRL  -/240/240 for control joint protection

PROMASEAL®-A Acrylic Sealant

Water Based Acrylic Sealant

PROMASEAL®-A Acrylic Sealant is a water based acrylic sealant. The advantage of this environmentally friendly water based sealant is in making post installation and site clean up easier.

If installed correctly, once cured PROMASEAL®-A Acrylic Sealant should not crack and it can be simply overpainted. It has a good resistance to water characteristics and some movement capabilities. Note that:
  1. PROMASEAL®-A Acrylic Sealant is water resistant once fully cured. However, it is not recommended for external use.
  2. The sealant should not be used where continuous water immersion is likely.
  3. The sealant is not recommended for use in wet or damp areas where ambient humidity is consistently high, e.g. bathrooms.
  4. The sealant is not recommended for use in around services where high movement may be expected. It is not recommended for use around services that require more than ±15% movement.

PROMASEAL®-A Acrylic Sealant is supplied in 300ml cartridges and 600ml foils.

Applications

Discover our references
Otago Poly1 Otago Polytechnic Student Village CLT Construction Dunedin - New Zealand Fire Collar
Promat-KODO-PROMASHIELD KODO Apartments Adelaide - Australia PROMASHIELD
General Technical Properties
< #Back#

GENERAL TECHNICAL DATA

Colour white/grey
Movement Capabilities ± 15%
Shore A hardness 50
Cure Time approx. 2mm per day at 50% humidity and 25°C
Tack Free 30 mins at 50% humidity and 23°C
Application Temperature 5°C to 40°C
UV Resistance Good
VOC 10 g/L
Acoustics up to Rw + Ctr = 56 dB
Max FRL -/240/240 (Joints)

GENERAL TECHNICAL DATA

Colour white/grey
Movement Capabilities ± 15%
Shore A hardness 50
Cure Time approx. 2mm per day at 50% humidity and 25°C
Tack Free 30 mins at 50% humidity and 23°C
Application Temperature 5°C to 40°C
UV Resistance Good
VOC 10 g/L
Acoustics up to Rw + Ctr = 56 dB
Max FRL -/240/240 (Joints)
Usage guide
< #Back#

USAGE GUIDE

Joint size (mm) Depth of sealant (mm) Metres per 300mm cartridge Metres per 600mm foil
10 10 3.0 6.0
20 10 1.5 3.0
30 15 0.66 1.33
40 20 0.38 0.75
50 25 0.24 0.48

 

PROMASEAL®-A Acrylic Sealant are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

USAGE GUIDE

Joint size (mm) Depth of sealant (mm) Metres per 300mm cartridge Metres per 600mm foil
10 10 3.0 6.0
20 10 1.5 3.0
30 15 0.66 1.33
40 20 0.38 0.75
50 25 0.24 0.48

 

PROMASEAL®-A Acrylic Sealant are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

Handling
< #Back#

HANDLING

Packaging Storage Shelf life
300 ml cartridges, 12 tubes per carton
600 ml foil/sausages packs, 12 packs per carton
  • Store in cool, dry, well ventilated area
  • Removed from oxidising agents, acids and food
  • Protect from heat and frost
 Original sealed containers at least 12 months

HANDLING

Packaging Storage Shelf life
300 ml cartridges, 12 tubes per carton
600 ml foil/sausages packs, 12 packs per carton
  • Store in cool, dry, well ventilated area
  • Removed from oxidising agents, acids and food
  • Protect from heat and frost
 Original sealed containers at least 12 months

Health & Safety
< #Back#

HEALTH & SAFETY

No special precautions are required. For more information please check the material safety data sheet:

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

HEALTH & SAFETY

No special precautions are required. For more information please check the material safety data sheet:

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

Documents
< #Back#

Product Datasheet

Product Datasheet

Safety Datasheet (SDS)

Safety Datasheet (SDS)

System Certificate

System Certificate

  • PROMASEAL SupaWrap for Metal Pipes System Certificate #DownloadLabel#
  • Penetrations in 1hr FR Plasterboard Walls System Certificate #DownloadLabel#
  • Penetrations in Speedpanel System Certificate #DownloadLabel#
  • Penetrations in 75mm Hebel/AAC Panels System Certificate + Install Details #DownloadLabel#

Resources

Resources

  • Passive fire Protection Systems for Cross Laminated Timber CLT #DownloadLabel#

Installation Guide

Installation Guide

  • Install Guide for Penetrations in 75mm Hebel/AAC Panels + System Certificate #DownloadLabel#

Product Datasheet

Product Datasheet

Safety Datasheet (SDS)

Safety Datasheet (SDS)

System Certificate

System Certificate

  • PROMASEAL SupaWrap for Metal Pipes System Certificate #DownloadLabel#
  • Penetrations in 1hr FR Plasterboard Walls System Certificate #DownloadLabel#
  • Penetrations in Speedpanel System Certificate #DownloadLabel#
  • Penetrations in 75mm Hebel/AAC Panels System Certificate + Install Details #DownloadLabel#

Resources

Resources

  • Passive fire Protection Systems for Cross Laminated Timber CLT #DownloadLabel#

Installation Guide

Installation Guide

  • Install Guide for Penetrations in 75mm Hebel/AAC Panels + System Certificate #DownloadLabel#

Send hard copy

Download


#Project related info#

Send by mail


#Project related info#

Promat Australia Pty. Ltd.
1 Scotland Road,
Mile End South,
Adelaide,
SA 5031