Fire Collars


  • A fire collar for every situation
  • Cast in and Retrofit options
  • Floor waste and stack solutions
  • Approvals for large variety of plastic type and sizes
  • Up to 315mm diameter pipes
  • Large variety of substrates approved including concrete, F.R plasterboard, Speedpanel and Hebel
  • Approvals for services other than plumbing pipes available

To download the Promat Fire Collar Selection App Click the links below

Get it on Google Play

Promat fire collars are manufactured using our PROMASEAL Grafitex intumescent technology. These fire collar are designed to maintain the integrity of the fire resistant element through which plastic pipes, combustible insulation, cables or fibre optic services pass. Fire collars are suitable for installation in the various types of floors, walls and ceilings in which they have been

In the event of fire, the plastic pipe will start to deform. In the case of uPVC pipes this occurs at a temperature of approximately 70°C. Once the pipe starts to deform, the intumescent material in the Promat fire collar expands, closing off the plastic pipe or combustible insulation, and thus forming an insulating barrier.

This intumescent compound continues to expand throughout the fire and forms a char which prevents flame and hot gases passing into adjacent compartments.

Compliant installations for the fire protection of service penetrations is not as straight forward as many would believe.  There are many traps that can catch out an unwary installer who may believe that they are doing the right thing, but in fact are not meeting all the requirements. The paragraphs below will attempt to help an installer navigate their way to a compliant installation for a fire collar system.

Fire protection of service penetrations through fire rated elements, is a requirement of the building code. Clause C3.15 in Vol 1 states that "the service, building element and any protection method at the penetration are identical with a prototype assembly of the service, building element and protection method which has been tested in accordance with AS4072.1 and AS1530.4 and has achieved the required Fire Resistance Level (FRL)..."

So to comply with the requirements of this clause it is not just about the collar itself. All the components listed have to be part of that tested system.

The parts of the system include:

  •  The size and type of plastic pipe used.(service)
  •  The type, size, construction and Fire Resistance Level (FRL) of building substrate that the pipe passes through and that the collar is installed on (building element)
  •  The fire collar that has been installed (protection method)
  •  The orientation of the pipe and collar (protection method)
  •  The fixing method used to apply the collar to the substrate.(protection method)

As an example, a test for a 100mm uPVC pipe in a two hour fire rated plasterboard wall (2 x 16mm each side of 64mm stud, total wall thickness of 128mm) can only be applied to an installation that uses the same wall, pipe size and collar. If the wall itself is thinner, or of a different material and the pipe is a different size or wall thickness then it will need a different approval. 

As you can see a complaint installation is not as straight forward as just installing a fire collar on a pipe. However Promat Australia have tested a wide variety of the commonly used combinations of pipe, substrate and protection methods that an installer would come across on a day to day basis. While we have a large variety of tested combinations it should be understood that their will not be a tested system for every eventuality that may occur on site. It should also be noted that if a new pipe or wall type come on the market, existing approvals may not necessarily be able to be applied to them.

To attempt to assist an installer or certifier to navigate this complex path, Promat Australia has developed an App for IOS and Android that will give you the answers. Find out more here

If you are not sure that the combination that you are facing on site is approved, then contact your local Promat office for further advice. 

Product Datasheet

Product Datasheet

Safety Datasheet (SDS)

Safety Datasheet (SDS)

System Certificate

System Certificate

Application & Technical Manual