PROMASEAL® Conduit Collar

ADVANTAGES

  • Suitable for pipes from 16 to 32mm
  • Tested with large variety of pipes including PEX, uPVC, PB, PEX/Al/PEX, Cables, Conduits and many others
  • Tested in a wide variety of wall types including F.R Plasterboard, Speedpanel & Hebel amongst others

Fire Resistant Collar for Plastic Pipes Penetration Seals

PROMASEAL® Conduit Collar is designed for retrofitting around small (<32mm) plastic conduit pipes that pass through fire floor or wall slabs. It comes in one size (32mm) and can be used on smaller diameter conduits without modification. The collar is fixed to the floors/walls with two brackets.

Insulation criteria will vary depending on types of the plastic pipes and the penetrating building element through which the collar passes.

The collar is supplied pre-made with an internal diameter of 32mm, however no change is required to the collar for pipes of smaller diameters.

Applications

Usage guide
< #Back#

USAGE GUIDE

Suitable for conduits up to 32mm, the collars are either attached to both sides of the wall or to the underside of a floor slab. Any gaps between the pipe and the wall or floor should be sealed with PROMASEAL®-A Acrylic Sealant. In certain applications for 60 minute rated plasterboard wall, 3 brackets may be required. Contact Promat for more details

PROMASEAL® Conduit Collar are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

Box Quantity - 10 

USAGE GUIDE

Suitable for conduits up to 32mm, the collars are either attached to both sides of the wall or to the underside of a floor slab. Any gaps between the pipe and the wall or floor should be sealed with PROMASEAL®-A Acrylic Sealant. In certain applications for 60 minute rated plasterboard wall, 3 brackets may be required. Contact Promat for more details

PROMASEAL® Conduit Collar are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

Box Quantity - 10 

Health & Safety
< #Back#

HEALTH & SAFETY

No special precautions are required. For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

HEALTH & SAFETY

No special precautions are required. For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

Documents
< #Back#

Product Datasheet

Product Datasheet

Installation Guide

Installation Guide

System Certificate

System Certificate

Safety Datasheet (SDS)

Safety Datasheet (SDS)

Product Datasheet

Product Datasheet

Installation Guide

Installation Guide

System Certificate

System Certificate

Safety Datasheet (SDS)

Safety Datasheet (SDS)